Shengbaoqiang – Fiber Cement Board Manufacturer in China
Shengbaoqiang – Fiber Cement Board Manufacturer in China
Shengbaoqiang (Jiangsu) Environmental Protection New Materials Co., Ltd. is a China-based manufacturer specializing in fiber cement boards and decorative fiber cement wall panels.
The company supplies fiber cement wall panels for building facades, exterior cladding, architectural decoration, and other construction applications. Available surface designs include wood grain, stone grain, brick patterns, grooved textures, and flat finishes, subject to product availability.
Fiber Cement Board Products
Shengbaoqiang provides fiber cement board solutions for distributors, building material importers, contractors, and project buyers.
Depending on the product model, customers can discuss panel dimensions, thickness, surface texture, color options, packaging, and other project-specific requirements with the factory.
Manufacturing and Customization
As a manufacturer based in Jiangsu, China, Shengbaoqiang works with international customers seeking factory-direct supply and customized product solutions.
OEM and ODM cooperation can be discussed according to product specifications, order quantities, branding requirements, and project needs.
Product Testing and Technical Information
Product selection should be based on the intended application, relevant technical specifications, and applicable local building requirements.
Shengbaoqiang provides available product test documentation for customer evaluation. Buyers are encouraged to confirm the tested product model, sample dimensions, test methods, and report scope before using the documentation for project approval.
Tested sample
The results below refer to one product type: Shengbaoqiang fiber cement board, 3030 mm × 455 mm × 16 mm. Testing was carried out by CABR Testing Center Co., Ltd. (National Center for Quality Inspection & Test of Building Engineering). Two separate reports are cited, and each table is tied to its own report number so that buyers can match every row to the original document.
Physical and mechanical properties
Report BETC-T4BC-2026-01542 · sample submitted 1 July 2026 · tested 27 August – 9 September 2026 · report issued 9 September 2026
| Property | Test method | Result |
|---|---|---|
| Apparent density | GB/T 7019-2024, 5.3 | 1.22 g/cm³ |
| Water absorption | GB/T 7019-2024, 5.3 | 16.5 % |
| Impermeability | GB/T 30100-2013, 16 | No moisture marks or water droplets on the back face after 24 h |
| Flexural strength (saturated) | GB/T 7019-2024, 5.7 | 8.6 MPa |
| Impact resistance | GB/T 7019-2024, 5.9 | No cracks on either face at the impact point |
| Moisture movement | JG/T 396-2012, Annex D | 0.05 % |
| Thermal conductivity (mean 25 °C) | GB/T 10294-2008 | 0.25 W/(m·K) |
| Warping after water absorption | JC/T 2085-2011, 6.12 | 0.06 mm |
| Bending failure load | JC/T 2085-2011, 6.6 | 2457 N |
Note on bending failure load: the specimen size for this test was 500 mm × 400 mm, tested at a loading rate of 1000 N/min, with failure or maximum load reached within 1–3 minutes.
Durability and surface performance
Report BETC-T4BC-2026-01544 · sample submitted 2 July 2026 · tested 3 July – 4 August 2026 · report issued 11 August 2026
| Property | Test method | Result |
|---|---|---|
| Freeze–thaw resistance (100 cycles) | GB/T 7019-2024, 5.8 | No delamination, spalling or other damage to the appearance |
| Stain resistance (immersion method, B) | GB/T 9780-2013 | Grade 0 |
| Scrub resistance (10,000 cycles) | GB/T 9266-2009 | No substrate show-through |
| Alkali resistance (saturated calcium hydroxide, 96 h) | GB/T 9265-2009 | No discoloration, blistering, peeling, chalking or softening of the coating surface |
Freeze–thaw performance in context
In the freeze–thaw resistance test, specimens were subjected to 100 freeze–thaw cycles and then examined for appearance quality. No delamination, spalling or other damage was observed (GB/T 7019-2024, 5.8).
For buyers specifying panels for cold-climate markets, three points are worth confirming before approval:
- Cycle count. The reported result covers 100 cycles. If your project specification calls for a different number of cycles, ask for a test matching that requirement rather than extrapolating from this result.
- Product type. The tested sample is the 3030 mm × 455 mm × 16 mm board. Other thicknesses and surface finishes are separate product types and are not covered by this report.
- System, not just panel. In service, freeze–thaw durability also depends on the fixing system, joint detailing, drainage and ventilation behind the cladding. Panel test data supports the material choice; it does not replace a project-specific facade design.
How to read these results
- Every value above comes from the report number shown in its table heading. Request the full PDF before submitting data for project approval.
- The figures describe the submitted sample tested under the stated methods. Normal production tolerance applies to commercial shipments.
- Surface-related results (stain, scrub and alkali resistance) refer to the finished face of the tested sample.
- Test reports are available on request through the contact details below.
Contact Shengbaoqiang
For product catalogs, technical data, samples, and quotations, contact Shengbaoqiang through the official website.
Website: https://www.sbqwallpanel.com/
Contact Us